// Model Specifications
WJD12G-2R Clothes Dryer Specifications
Review this model's specifications and prepare an inquiry with Wanjiada.
The folding enclosure is 750 L with a 1,300 W, 220 V / 50 Hz supply and 20–240-minute timer. Read size and weight, without an unverified load rating.
- 1,300 W
- Rated power
- 750 L
- Enclosure volume
- 20–240 min
- Timer range
Model selection checklist
Distinguish enclosure size, electrical power and timer settings.
- Enclosure and garment load
- Check the physical footprint and enclosure volume. Garment load remains a separate requirement to confirm.
- Power and timer
- Review supply and power. The timer range is a setting, not a promise of completed drying.
// Model Parameters
Technical specifications
| Model | WJD12G-2R |
|---|---|
| Product type | Heated folding enclosure |
| Electrical supply | 220 V / 50 Hz |
| Rated power | 1,300 W |
| Enclosure volume | 750 L |
| Timer range | 20–240 min |
| Product dimensions | 95 × 48 × 185 cm |
| Net weight | 5 kg |
| Gross weight | 5.5 kg |
Imperial measurements are approximate conversions. Packaging and final configuration are confirmed with the order.
Applications and compatibility
Heated clothes drying in a folding enclosure, rather than a tumble drum. The original room photograph is illustrative, not a customer installation or brand endorsement.
The supply is 220 V / 50 Hz. Confirm plug and garment instructions. 750 L is enclosure volume; 20–240 minutes is the timer range, not guaranteed drying time. Load weight remains unconfirmed.
Documents and ordering
Net and gross weights are listed separately. Confirm garment load, packaging dimensions, MOQ, sample terms and lead time in the quotation.
Before you place an order
- Model and market documents
- Request exact-model documents for your destination.
- Minimum order and samples
- Confirm MOQ, sample availability and charges.
- Packaging and delivery
- Agree packing, quantity and schedule in the quote.
// Model & Project Inquiries
Tell us which model you need
Ask about model selection, an order, OEM/ODM customization or a separate plastic molding project.
Files for your inquiry
Send supporting files separately to wanjiada@gdboost.com. Include the same model or project reference as your form submission.
- Model-selection information
- A photograph or layout of the intended space, its dimensions and the available electrical supply can help explain the requirement.
- Order or customization references
- Email any model list, packaging artwork or drawing relevant to your inquiry, using the same name and project reference.