Commercial Evaporative Coolers

Wanjiada manufactures evaporative air coolers for international business buyers. Compare three existing models, screen the site conditions and prepare a requirement for model-specific assessment.

Original side view of the WJD8000F-1M air cooler
WJD8000F-1M · side view. Product appearance is not evidence of application suitability.

Site screening

Start with the occupied area and its operating conditions, rather than assigning equipment from floor area alone.

Climate and moisture
Record the temperature and relative humidity during use. Evaporative cooling adds moisture; high humidity reduces its cooling potential. Check moisture-sensitive goods or processes.
Air path and placement
Identify incoming air, exhaust paths, obstructions and occupied positions. Ask the technical team to establish ventilation and placement requirements for the exact model.
Power, water and upkeep
Record local supply, refill access, drainage and maintenance arrangements. Confirm the model's electrical configuration and operating instructions before ordering.

General evaporative-cooling reference — U.S. Department of Energy, Home Cooling 101: low-humidity use and added moisture. This general principle is not a Wanjiada model test or application approval.

Model comparison

Three catalog models offer different dimensions and control options for a commercial project shortlist. Compare the listed specifications, then confirm the exact configuration and site requirements before ordering.

WJD4500F-2Z in the supplier's original room composite

WJD4500F-2Z

The smaller listed dimensions provide a starting point when reviewing available placement space.

Established specifications
Catalog control typeElectronic
Rated power125 W
Airflow · high4,500 m³/h
Airflow · medium3,200 m³/h
Airflow · low1,800 m³/h
Water tank42 L
Assembled size500 × 410 × 960 mm
Net weight12.6 kg
Voltage / frequencyTo be confirmed for the ordered configuration
Open model specifications
WJD8000F-1M original front view with two control dials

WJD8000F-1M

The mechanical-control option in this shortlist; compare its operating interface with the electronic version.

Established specifications
Catalog control typeMechanical
Rated power200 W
Airflow · high8,000 m³/h
Airflow · medium6,000 m³/h
Airflow · low3,500 m³/h
Water tank80 L
Assembled size680 × 410 × 1,250 mm
Net weight18 kg
Voltage / frequencyTo be confirmed for the ordered configuration
Open model specifications
WJD8000F-2Z in the supplier's factory composite, not an installation record

WJD8000F-2Z

An electronic-control option with the same listed tank, airflow and assembled dimensions as WJD8000F-1M.

Established specifications
Catalog control typeElectronic
Rated power200 W
Airflow · high8,000 m³/h
Airflow · medium6,000 m³/h
Airflow · low3,500 m³/h
Water tank80 L
Assembled size680 × 410 × 1,250 mm
Net weight18 kg
Voltage / frequencyTo be confirmed for the ordered configuration
Open model specifications

Airflow is not cooling capacity or effective room ventilation. Tank volume does not establish runtime. Assembled dimensions are separate from inverted-tank packing dimensions.

The room and factory composites identify the products only. They are not customer installations, performance evidence or industrial-use approvals.

Use and model selection

Use these two starting points for a project discussion. Selection depends on the site's air exchange, moisture tolerance and operating arrangements; no whole-space cooling result is implied.

WJD4500F-2Z rear view with filter frames open and cooling pad visible
WJD4500F-2Z · original rear view. This image is not a cleaning or service procedure.

Shop staff work areas

Models to compare: WJD4500F-2Z

Start with WJD4500F-2Z when comparing placement space: its listed width is 500 mm, against 680 mm for the two 8000F models. This dimensional difference does not establish cooling coverage.

Site conditions to confirm: Confirm air exchange, placement clearances, moisture tolerance and the exact electrical configuration with our technical team. Closed rooms and whole-shop cooling require separate assessment.

Warehouse packing work areas

Models to compare: WJD8000F-1M / WJD8000F-2Z

Compare the mechanical WJD8000F-1M with the electronic WJD8000F-2Z. Both list 80 L tanks and 8,000 m³/h high-speed airflow; control preference is separate from site suitability.

Site conditions to confirm: Assess the occupied packing zone, goods' moisture tolerance, dust, air paths, aisles and water handling with our technical team. Confirm operating conditions before ordering; no whole-warehouse coverage or unit count is assumed.

Operating requirements

Which electrical version should be specified?

Voltage and frequency are not established in the three current model records. Obtain the exact supply, plug and any adapter requirements for the destination market; no default mains specification is assumed.

Can floor area or tank volume determine the quantity?

No supported area-based sizing rule or guaranteed runtime is available. Assess the occupied zone, climate, air paths and refill arrangements before considering equipment quantity. An 80 L tank alone does not establish continuous operating hours.

Does this shortlist establish outdoor or industrial use?

No. Outdoor exposure, water protection, industrial environments, low noise and fixed temperature reduction are not established. Enclosed, humid or moisture-sensitive spaces need separate evaluation rather than a general suitability claim.

What documents and operating instructions are needed?

Request the exact configuration's use restrictions, placement, refill, drain, cleaning and maintenance instructions. WJD8000F-2Z has two sample-scoped compliance attestations on its model page; these do not establish application suitability or approval for every configuration and market.

Site inquiry brief

Use this outline to describe a real project. Model suitability and commercial terms are assessed separately; this outline does not generate a quotation.

MOQ, samples, availability, accessories and lead time are confirmed in the actual quotation for the selected configuration.

Discuss a site requirement
wanjiada@gdboost.com+86-663-8321900

Copy this outline into your inquiry and add the available site details. Our team can review the model, configuration and requirements with you before an order.

Privacy Policy