Skip to content

CIF Price on an Appliance Order: Freight, Insurance and Carton Volume

The freight half of a CIF price follows the cubic metres your cartons take, the insurance half follows the value. Build both per model on a mixed order.

CIF Price on an Appliance Order: Freight, Insurance and Carton Volume

Two CIF quotations for the same coolers can differ by more than the freight. One splits a container's freight across the models by the cubic metres their cartons take; the other splits it by carton count. Same goods, same lane, two different CIF prices for the same model. A CIF price on an appliance order is therefore not one number to compare but two lines to check — ocean freight, which follows the space the cartons occupy, and cargo insurance, which follows the value declared — and both are built from the packing record, model by model.

We publish no prices, so every CIF figure we send belongs to one order: the models and their suffixes, the quantity of each, the carton version and the destination port. What this page adds is the arithmetic that lets you take that figure apart before you accept it.

What is inside a CIF price on an appliance order?

The goods, the ocean freight to the named destination port, and the cargo insurance cover. CIF is one of the four Incoterms 2020 rules for sea and inland waterway transport — alongside FAS, FOB and CFR — and its name is a list of its contents: cost, insurance and freight, with a port of destination named in the contract (the International Trade Administration's summary of the rules).

Two things the rule does not do, and both matter before you compare quotations. It does not price the goods, and it does not set the method or the timing of payment; the International Trade Administration lists both among the matters the rules leave to the sale contract. The term tells you which two costs the seller carries and where its figure stops. It does not tell you what a fair unit price is, or when the money moves.

It does decide that the last two parts are the seller's to arrange and yours to verify. Each of them is a real cost with its own basis, and neither basis is the goods themselves.

Why does the carton decide the freight line, not the cooler?

Because freight is bought in space, and the space is the packed carton. The WJD8000F-1M shows how far the two measurements drift apart: 680 × 410 × 1,250 mm assembled, and a 695 × 460 × 980 mm carton for the same unit with its tank inverted — a carton 270 mm shorter than the machine it holds. A freight figure calculated on the machine's height is measuring something the carrier never sees.

The packed figures sit on each model's record, beside the product dimensions and the weights, so the space per carton can be worked out before an order exists. The volumes and the last column below are arithmetic on the figures published there — length × width × height for the volume, gross weight divided by it for the last column:

Model Carton Volume per carton Gross per carton Kilograms per m³
WJD4500F-1D 550 × 460 × 1,020 mm 0.258 m³ 14.6 kg about 57
WJD8000F-1M 695 × 460 × 980 mm 0.313 m³ 21 kg about 67
WJD880F-1D 330 × 330 × 670 mm 0.073 m³ 6 kg about 82

The last column is the one to hold on to. Read down it and the density rises by about 44%, from about 57 kilograms per cubic metre for the 42 L carton to about 82 for the small cooler's, so the space a kilogram of cooler occupies is lowest on the dense carton and highest on the light one. A rate quoted per cubic metre and a rate quoted per kilogram therefore do not distribute the same freight in the same way, and on a mixed order that difference lands on the models unevenly.

The WJD4500F-1D, the 42 L cooler whose 550 × 460 × 1,020 mm carton sets the freight line on this page

One more reason to ask which carton the freight was calculated on: our packing changes with the order — a branded carton, an accessory added beside the unit, a different tank orientation — and a changed carton is a changed volume. So have the freight quoted on the packing version your order is confirmed against, not on an earlier one. The same discipline governs any figure on the order: the number on the paper has to be the confirmed one, which is why three cooler models' tank figure was restated from 6 L to 5.5 L before approval (how that correction was handled).

How does one container's freight reach each model on a mixed order?

By a split that somebody chooses, and on a mixed order that choice moves money between the models. Take 100 cartons of each of two coolers from the table above: 100 × 0.258 m³ plus 100 × 0.073 m³ is 33.1 m³ of cartons, and 100 × 14.6 kg plus 100 × 6 kg is 2,060 kg gross.

Basis for splitting the freight 100 × WJD4500F-1D 100 × WJD880F-1D
Share of the cubic metres 78% 22%
Share of the cartons 50% 50%
Share of the gross weight 71% 29%

On carton counts each model carries half the freight. On space, the 42 L carton earns almost four-fifths of it, so the small carton is charged about 2.3 times what its volume would earn. Both splits can be described as "freight included"; only one of them can be rebuilt from the packing list. Nothing in the term decides which is right — the quotation does, and the difference is invisible unless the split is written down.

The same arithmetic is worth running the other way. If a supplier's CIF unit prices sit further above their FOB unit prices than the carton volumes explain, the freight is being allocated by something other than space, and it is fair to ask what.

A loaded container with the cartons stacked in tiers and the height above them unused: the freight inside a CIF price is bought against this space, not against the coolers' product dimensions

Why can't the insurance line be checked the way the freight line is?

Because its basis is value. Under CIF the seller arranges the cover, and the ICC sets the default level at Institute Cargo Clauses (C), with a higher level available only if the contract agrees it (the ICC's page on the 2020 rules). A premium is a rate applied to an insured amount, and the insured amount is a figure the contract fixes — the CIF invoice value, or a figure above it if the parties agree one.

That figure is where the line gets awkward. A CIF invoice already contains the premium, so the premium is charged on a total that includes it. You cannot rebuild the insurance line by adding a percentage to the goods price and hoping it lands; ask for the insured amount, the cover level and the premium rate, and check the three against each other.

The amount also ties the two lines together, which is why the split in the previous section is not a private arrangement between you and the freight desk. On a mixed order each model's CIF price is part of the value the cover is measured against, so the freight allocation travels into the invoice, the insured amount and the certificate. If those three do not agree line by line, the certificate does not describe the order you placed.

A certificate and an invoice value: the insurance half of a CIF price is measured on the value declared, not on the space the cartons take

When the certificate arrives, read what it names: the goods, the voyage, the insured amount, and the party entitled to claim. A certificate that names a value rather than your order is one to send back before the container sails.

Which figures can you rebuild, and which must come from the quotation?

Four can be rebuilt from the model records before you ask anything:

  1. The volume per carton, in cubic metres.
  2. The cubic metres per model, and the total for the order.
  3. Each model's share of that total, and its kilograms per cubic metre.
  4. The freight each carton would carry under a volume split, once the freight figure arrives.

The quotation has to supply the rest, because it depends on the booking, the lane and the cover:

  1. The freight figure, its basis — per container or per cubic metre — and the carton count it was calculated on.
  2. The freight split per model, not only the total.
  3. The insured amount, the cover level and the premium rate.
  4. The named destination port, and the date the figure holds.

What should you send to get a CIF price you can check?

Five things: the model with its full suffix, the quantity per model, the carton version if it is not the standard one, the destination port, and a request for freight and insurance as separate lines. Put all five in one written request (the fields a quotation is actually priced from). The suffix matters more than it looks: the 42 L models share one product size and one stated airflow, yet the family page lists a 24 V DC supply for the WJD4500F-1D and the WJD4500F-2D, 125 W for the WJD4500F-1Z and the WJD4500F-2Z, and leaves the supply of those two to be confirmed on the order.

Send that, and the arithmetic becomes a quotation you can test: freight per model against carton volume, premium against insured amount, and each model's CIF value against the line the invoice will print. The packing figures sit on each cooler's model record, and the request goes through our inquiry page.

Send the model list, the quantities and the port, and ask for the two lines apart. A CIF price you can take apart is worth more than one you can only trust.

Filed under Payment and Shipping Terms

Back to Blog